TAMPING UNIT TU03

This equipment can be used with Railroad Loaders.

The hammers vibration is obtained by means of an hydraulic vibration cylinder.
It is possible to vary both frequency and amplitude of the vibration from the cabin of the loader.

To use the tamping unit tu03 the following technical characteristics are required:

Vibrations of the tines: Hydraulic line with a flow of 100 l/min, at a max p=250 bar. 360° continuous rotator, necessary to turn and place the accessory in the required position, an hydraulic line with a flow of 40 l/min, at a max p=150 bar.
Alternating restriction movement of the tines, a third hydraulic line with a flow of 60 l/min, at a max p=250 bar. To put in operation and control the tamping unit, an electronic board should be installed inside the operator’s cab.

ADVANTAGES:

The tamping system, equipped with hydraulic vibration, implies less maintenance costs in comparison with traditional (mechanical) systems.

The hydraulic vibration group can be effortlessly and quickly disassembled; the spare parts are very cheap and can be found easily. The maintenance staff does not need to be highly specialized.