TAMPING MACHINE STAR TM04M
COLMAR STAR TM04M MULTIROLE
LEVELLING, LIFTING, LINING AND TAMPING MACHINE FOR PLAIN TRACK AND TURNOUTS
TAMPING MACHINE STAR TM04M MULTIROLE
Structure:
Frame made of sturdy electro-welded girders.
Two bogies, two motorized axles
Pneumatic brakes
4 locking devices for the axle suspensions
Continuous and automatic UIC brake
Two emergency braking valves
Direct brake.
Parking brake.
Checking, Measuring, Recording:
The tamping machine is equipped with rope/sag system to measure track geometric parameters, computerized system for data processing and job planning. The measuring system allow the recording of the following parameters:
- Gauge,
- Transversal level,
- Alignment to the rail,
- Longitudinal level,
- Skew,
- Sensor to measuring the geometry of the track when loaded.
Technical characteristics |
||
---|---|---|
Weight | t | 75 |
Length | mm | 27.000 |
Max. width | mm | 2.500 |
Wheel base, inter axis pivot boogies | mm | 14.000 |
Wheel Diameter | mm | 920 |
Minimum radius in self propelled mode | m | 90 |
Minimum radius in working mode | m | 150 |
Minimum radius in convoy mode | m | 150 |
Max speed in self propelled mode (straight and level rail) | km/h | 100 |
Max speed in convoy mode | km/h | 100 |
Engine | Diesel | |
Power | kW | 565 |
N° 4 independent Tamping units with 16 tines / longitudinal advancement 500 mm / sidewise movement 2.500mm. Centralized lubrication of the tamping units |
||
Lifting/aligning system | 3 rail rows |
Shift of lifting system of 3.000mm from track longitudinal axis
Longitudinal advancement
Nebulisation system for dust suppression.
Soundproof front cabin.
Soundproof rear cabin.
Working cabin.
Rotating brush.
Hopper for ballast/ conveyor belt from revolving brush.
Optional:
Regulating unit.
Compacting units.
Colmar reserves the right to amend the data contained within this brochure at any time.