BALLAST BROOM BB06
To use the ballast broom the following technical characteristics are required:
For driving the broom:
- an hydraulic feeding line with flow= 110 l/min, and p= 250 bar
- a return line
- a drainage line
- a on-off switch in the cabin for actuation
For driving the conveyor:
- Double acting line with flow= 30 l/min, and p= 180 bar
- a on-off switch in the cabin for actuation
For lifting the broom, a third line is required with flow 20 l/min and p= 100 bar. A on-off switch in the cabin for actuation.
Device for cleaning the track – Excess ballast removal
Structure made of electro-welded steel plates – frame with four idle wheels.
Available for all type of gauges
Rotor with n. 6 brush rows, made of hoses: Ǿ 50 mm.
An hydraulic motor driven by an hydraulic pump of the loader.
Adjustable height of the ballast broom: by hydraulic device actuated by the operator in the loader’s cab.
Unloading conveyor belt, lateral right/left, also driven by the operator on the cab.
Sprinkler system for dust removal – tank capacity 400 Lt
Rotor brushes | mm | 950 |
Working speed | m/h | 800 |
Working width | mm | 2.600 |
Total width | mm | 2.930 |
Total length | mm | 2.500 |
Weight | kg | 3.000 |
Colmar reserves the right to amend the data contained within this brochure at any time.